The Largest Manufacturer of Pipe couplings, Flange Adaptors, Stepped Couplings, Dismantling Joints and related products in the Southern Hemisphere
Technical Data
a
Products
a
>> Ranger Couplings
a
  >> Ranger Stepped Couplings
a
  >> Ranger End Caps
a
  >> Gripper Couplings
a
  >> Dedicated Couplings
a
  >> Stepped Couplings
a
  >> Ranger Flange Adaptors
a
a
  >> Gripper Flange Adaptors
a
  >> Dismantling Joints
a
>> Shouldered Coupling
a
  >> Repair Clamps
a
>> Junior Couplings
a
>> Socket Steel Fittings
a
 
NEWS FLASH
a
Launch of our all New SHOULDERED COUPLING
a
a
a
Launch of our all New
REPAIR CLAMPS
a
a
a
RANGER END CAPS
KLAMFLEX Ranger End Caps are manufactured from our Ranger Couplings, therefore giving you the versatility of using them on a variety of different pipe OD’s and materials. KLAMFLEX Ranger End Caps are therefore suitable for all popular standard pipe sizes ranging from 50mm to 300mm and are designed for the use in air, water, sewer, and gas pipelines up to 16 Bar. KLAMFLEX Ranger End Caps are supplied with and EPDM rubber seal and coating can either be Red Oxide or Fusion Bonded Epoxy. KLAMFLEX Ranger End Caps can be manufactured with double sleeves to prevent end pullout on PE, HDPE and GRP pipes.

END CAPS

NOM. BORE
PIPE O.D. RANGE
APPROX
MASS (kg)

PIPE MATERIAL SUITABILITY
50mm/2” 59-72 3.1 STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV.
65mm/2.5" 72-85 3.3 STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV.
80mm/3" 88-103 4.5 STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV.
100mm/4" 109-128 4.9 STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (imperial).
125mm/5" 138-153 5.2 STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (imperial).
150mm/6" 159-182 7.4 STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial).
175mm/7" 192-210 9.6 STEEL (imperial+metric), UPVC, CI, AC (imperial). 
200mm/8" 218-235 10.6 STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial), GRP.
225mm/9" 230-247 17.4 STEEL (imperial+metric), DI, AC (cod), AC (cid), AC (imperial).
250mm/10" 267-247 18.8 STEEL (imperial+metric), UPVC, AC (cid).
250mm/10" 272-289 17.1 STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial), GRP.
300mm/12" 315-332 24.2 STEEL (imperial+metric), UPVC, DI, AC (cid 24), GRP.
MAX WORKING PRESURE:  16 BAR
SETTING GAP:  19mm
TOLERANCE ON ANGULAR DEFLECTION:  3 DEGREES
EXPANSION & CONTRACTION RANGE:  0-5mm
RECOMMENDED BOLT TORQUE:  60-80 Nm
FOR END CAPS OF 25 & 40 BAR WORKING PRESSURE PLEASE CONTACT KLAMFLEX  
© 2010